All Apple devices that can be connected to a PC using the USB port will use Apple’s mobile device driver for Windows. To check which version of this driver is installed, use the following steps:
- Make sure the iPad, iPhone or iPod is connected to the PC using a USB cable.
- Open the Windows Device Manager from the Control Panel, or type “devmgmt.msc” at the Start menu.
- In the Device Manager, expand or open the Universal Serial Bus Controllers group.
- Locate the Apple Mobile Device USB Driver, and right-click this device.
- In the popup menu, select Properties.
- Next select the Driver tab.
- Check the Driver Date and Driver Version of the Apple USB driver to see if you have the latest version of the driver.
To update an Apple USB driver, you normally need to install the updated iTunes application. If you download the stand alone Apple USB driver update using DriverFinder, you can simply update the driver without the need to download and install the complete iTunes software.
Once downloaded, simply run the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi for 64-bit Windows versions) to install the new driver.
When you plug your iPod, iPhone or iPad, the new driver will automatically be used!
We’ve all been there at one point; just when you’re seconds away from a Skype call, you realize that you’re freaking mic is not detected by Skype! This happens often especially if you have various audio devices connected to your PC. Following are three (3) simple things you can do to make Skype recognize your mic.
Three Ways to Make Skype Detect Your Mic
1. Check that the RIGHT audio device (mic) is selected by Skype.
- Open Skype.
- From the Tools menu, click Options and then select the Audio Settings tab.
- Click the Microphone down arrow and then select the device that Skype should use. (As you can see on the screenshot below, since my microphone is connected to my PC via USB, I selected ‘Microphone (USB Audio Device)’.
2. Check that the correct recording device is selected on your PC. (The succeeding steps were done on a Windows 7 PC. Minor differences in steps may be needed for Windows XP and Vista.)
- From the Windows Start menu, click Control Panel.
- Click Sound.
- Select the Recording tab.
- Select the microphone device you indicated in Skype (Step 1 above).
- Click the Set Default down arrow and then choose Default Device.
- Click OK to close the Sound window.
3. Update your sound card driver. Skype still not detecting your microphone after the above tweaks? Then perhaps you should update the drivers of your sound card.
- Here’s the manual way to do this.
- Check the brand and model of your sound card. You can do this by literally opening up your machine, taking out the sound card and checking it’s brand and model. Another way is to check your PC brand and model. You then go to the PC manufacturer’s website (e.g., Asus, Dell, Samsung, HP, etc.) and then check what sound card they put on your PC.
- Now that you know the sound card brand and model, you can go to the website of the sound card maker (e.g., Realtek, SoundMAX, etc.) and check if they have new sound card drivers for you to download.
- If they do, download the new sound card driver and install it on your PC.
- Restart your system.
- Here’s the fast and automated way to do this.
- You can use DriverFinder to update your sound card drivers. (In this screenshot, you can see that DriverFinder has detected the sound card device on my PC in seconds.)
- Click the Start Scan button at the top to enable DriverFinder to look for new drivers for your PC. (In the screenshot below, new drivers for my Realtek sound card, as well as for other devices on my PC, have been detected.) Just register for the full version and you can download and install the recommended drivers for your PC in minutes.
That’s it. Try these tips and here’s to you getting Skype to recognize your mic once again!
On the DriverFinderPro.com site, you’ve probably noticed the presence of various Trust-Guard seals or logos. You can see them of the side bar of this post too under the Safe and Secure header.
But what do these images mean?
Trust-Guard Seals = Safety and Security
The seals you see are more than just ‘decoration’ on our site. These logos further relay our commitment to you. You see these Trust-Guard logos indicate that we have deliberately subjected ourselves to 3rd part testing and verification. Let us break it down a bit for you.
The Security Verified seals means that Trust-Guard has verified that DriverFinderPro.com uses at least 128-Bit SSL Encryption on pages where private information may be entered. It has further been verified that the SSL certificate we use is issued by Verisign.
The Business Verified seal indicates that DriverFinderPro.com has undergone a rigorous identification process to ensure that it’s a legitimate company. This verification includes an Address Verification (where our address was confirmed via fax or US Mail by Trust-Guard), an Email Verification (where an email was sent to and verified received by DriverFinderPro.com), and a Phone Verification (where a phone call was placed and it was confirmed to be the company’s phone number).
We take safety and security seriously at DriverFinder! If you want to know more, please visit our Integrity Statement.
We subject DriverFinder to all kinds of independent security checks all the time as part of our efforts to re-assure you that the DriverFinder download is safe and secure.
This time we’d like to make special mention of the check that DownloadRoute.com did on DriverFinder. On November 1, 2011, they subjected DriverFinder not only to one but FOUR different anti-virus tools: Avira AntiVir Premium, Dr.Web antivirus, Kaspersky Anti-Virus, and NOD32 antivirus.
The results? DriverFinder download test: PASSED
Did you know that only those who have been officially certified by Microsoft can use the Windows 7 compatible logo you see on the left?
Sadly, a lot of people online misuse this image. They put it on their sites to try and pass off their software as something that has been tested and certified by Microsoft as perfectly usable for their Windows 7 operating system.
We here at DriverFinder do not believe nor support such tactics. We have submitted our software to the Microsoft Compatibility Center months ago and have been officially using the logo you see above since.
Please go ahead and click here to visit Microsoft’s Compatibility Center and see DriverFinder featured there as being 100% Windows 7 compatible for both 32-bit and 64-bit systems. This is just one of the ways we ensure that our product works best for you. Please do check our Integrity Statement as well to see the many ways we ensure your safe and secure use of DriverFinder.
Thanks for your time!